The application EXACT2 Convolutional Neural Network Trainer from project Citizen Science Grid uses 1.3GB RAM per task!

I'm running 8 Exact & 8 Exact2 Wu's on my 64gb of Memory Win 10 Laptop, all I'm seeing is about 405MB's for the Exact & 450MB for the Exact2 Wu's.

I did see about 1.4GB's of Memory on my Win 8 Laptop though running 8 at a time of the Exact2 Wu's, stopped running them on that box as it only has 8GB of memory.

Check the WU ID,

example; exact_genome_1490113752_9_3212

The ones with 9 or 10 are the big ones, the 11 or 12 ones are regular size...

From Travis;

Workunits with a search id of 9 or 10 are running the larger CIFAR-10 dataset, and workunits with a search id of 11 or 12 are running the MNIST dataset. The search ID matches up to the searches on the overview page:

Now that the ATLAS move to LHC has been announced, I'm wondering how this consolidation will affect us here.

ATLAS has 2 apps: ATLAS Simulation / ATLAS Simulation Running on Multiple Core
LHC has one app: ATLAS Simulation

However the LHC app is a multicore configurable app

See the problem?

example; exact_genome_1490113752_9_3212

The ones with 9 or 10 are the big ones, the 11 or 12 ones are regular size...

Thanks. My Linux system seemed to handle them reasonably well; didn't try to run more than it could, but such well defined tasks are a rarity these days (with so many greedy virtual machine tasks hogging to failure).

Now that the ATLAS move to LHC has been announced, I'm wondering how this consolidation will affect us here.

ATLAS has 2 apps: ATLAS Simulation / ATLAS Simulation Running on Multiple Core
LHC has one app: ATLAS Simulation

However the LHC app is a multicore configurable app

See the problem?

Perhaps the LHC configurable MT app will replace the ATLAS MT app?

For here, I suggest just keeping the previous apps against old (migrated/merged) projects, akin to dead apps/projects - rather than trying to merge apps/projects (less work).

If the configurable mt LHC app starts to be used by ATLAS then it would be a new app for ATLAS.

PrimeGrid has announce their new LLR 3.8.20 that is now live and supports multi-threading. This is LLR tasks only, Sieve and GFN are still single core.

You need to either use an app_config (preferred) or app_info to enable the multi-threading. I suspect this will cut your hours down if running one multi-thread over single cores, but it is now a choice you can use.

---

My movie https://vimeo.com/manage/videos/502242

PrimeGrid has announce their new LLR 3.8.20 that is now live and supports multi-threading. This is LLR tasks only, Sieve and GFN are still single core.

You need to either use an app_config (preferred) or app_info to enable the multi-threading. I suspect this will cut your hours down if running one multi-thread over single cores, but it is now a choice you can use.

The same application on the project SRbase (NB "-tx" without space)

There are no problems with the hours, if everything is correctly written to a file app_config (link)

<app_config>

<app>
<name>llrSOB</name>
<fraction_done_exact/>
</app>

<app_version>
<app_name>llrSOB</app_name>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
</app_version>

</app_config>

Acoustics@Home have pushed out some initial workunits, though they are all failing for me on 64bit linux.

App name is SSPEMDD

http://www.acousticsathome.ru/boinc

---

App name is SSPEMDD

SSPEMDD: Sound Speed Profile Estimator from Modal Delay Data

Takes all available memory and dies of greed ;-)

RU forum

Thanks to Bok's awesome new feature, I've found an anomaly

From the Active Projects page:
cgminer (Campaign #5) (for 1+TH/s ASICs) 171

From my activity:
Bitcoin Utopia (Campaign #5) (for 1+TH/s ASICs) 342.92 7.42

These must be the same app.

The application Theory Simulation from project LHC@home 1.0 is active

The application LHCb Simulation from project LHC@home 1.0 is active

Did the project come back?

App name is SSPEMDD

SSPEMDD: Sound Speed Profile Estimator from Modal Delay Data

Takes all available memory and dies of greed ;-)

RU forum

No problems running on 64-bit Ubuntu with 16GB RAM, WUs take a little over 4MB at max. I already completed 80 that got validated, 13 more are awaiting validation.

---

Bad news - DrugDiscovery@Home project is stopped.
I hope that the personal data of users did not go to scammers.

Bad news - DrugDiscovery@Home project is stopped.
I hope that the personal data of users did not go to scammers.

Wild & Crazy Times @ BOINC ... lol

USPEX@home alpha testing

App for Win64 (vbox64), 1 task/host, 20 min cooldown timer, 1-40 min run time

System requirements:
•Windows 7+
•BOINC-client 7+
•Virtual Box 5.1.12+
•700 MB RAM
•10 GB free disk space

Warning: VirtualBox version within default BOINC-client is depricated.

USPEX@home alpha testing

App for Win64 (vbox64), 1 task/host, 20 min cooldown timer, 1-40 min run time

System requirements:
•Windows 7+
•BOINC-client 7+
•Virtual Box 5.1.12+
•700 MB RAM
•10 GB free disk space

Warning: VirtualBox version within default BOINC-client is depricated.

Tried one with Oracle 5.1.18 installed right from Oracle, WU Erred out in 33 seconds ... PBOYZTOYNP9873 prediction STE\/E vmvasp_11_45_1 1.15 Virtual Machine for VASP (protected edition) (vbox64) 00:00:33 (-) 100.000 0.09 - 4/6/2017 8:58:37 AM Computation error

Tried one with Oracle 5.1.18 installed right from Oracle, WU Erred out in 33 seconds ... PBOYZTOYNP9873 prediction STE\/E vmvasp_11_45_1 1.15 Virtual Machine for VASP (protected edition) (vbox64) 00:00:33 (-) 100.000 0.09 - 4/6/2017 8:58:37 AM Computation error

I also use this version, specially updated for this project (+ VBox ExtPack)
All tasks are completed successfully

'D:\Program' is not recognized as an internal or external command,
operable program or batch file.

You have a problem with the path to the program - there are no quotes near the "Program Files"

Tried one with Oracle 5.1.18 installed right from Oracle, WU Erred out in 33 seconds ... PBOYZTOYNP9873 prediction STE\/E vmvasp_11_45_1 1.15 Virtual Machine for VASP (protected edition) (vbox64) 00:00:33 (-) 100.000 0.09 - 4/6/2017 8:58:37 AM Computation error

I also use this version, specially updated for this project (+ VBox ExtPack)
All tasks are completed successfully

http://wuprop.boinc-af.org/forum_forum.php?id=2

'D:\Program' is not recognized as an internal or external command,
operable program or batch file.

You have a problem with the path to the program - there are no quotes near the "Program Files"

I installed the Extension Pack & will see what happens when I can get another Wu, I don't have trouble with other V-Box Projects or other Project Regular Wu's on that Box so there should be none with this project either I would think ...

EDIT: Well that didn't work either, erred out in the usual 33 Seconds,only thing I cant think of is that it's a Win 10 Box & needs something else installed ...

EDIT #2 I did get the Wu's to run on the 2'nd Installation Of BOINC on that Box, weird why it will run on 1 but not the other. I Detached & reinstalled the Project again in the bad one to see if that helps ...

It was announced that BitcoinUtopia will close down in the early summer,

http://www.bitcoinutopia.net/bitcoinutopia/forum_thread.php?id=1129

Looks like I can finally post a new project also here: ;-)
Climate@Home Version 2
High requirements though: 64-Bit OS, VirtualBox, 1024 M RAM for a task and at least 10 GB harddisk space pro task.

---

Life is Science, and Science rules. To the universe and beyond
Member of BOINC@Heidelberg
My BOINC-Stats

Looks like I can finally post a new project also here: ;-)
Climate@Home Version 2
High requirements though: 64-Bit OS, VirtualBox, 1024 M RAM for a task and at least 10 GB harddisk space pro task.

It appears that reCAPTCHA is faulty and so I can't create an account. It seems that Climate@Home 2 is a whole new project after Climate@Home. But is being recorded here as the old project.

Conan

---