Cannot find the Spatiotemporal Quality of Service (QoS) app yet in my list.

+1, still missing...

---

Life is Science, and Science rules. To the universe and beyond
Member of BOINC@Heidelberg
My BOINC-Stats

Albert@Home Binary Radio Pulsar Search does not seem to be updating.
I'm stuck at, Albert@Home Binary Radio Pulsar Search 32.18 16.20

Going by Albert the app name is, Binary Radio Pulsar Search v1.33 (BRP4X64).

On one system I have 61 tasks completed (about 1h each) since the 19th.
On another system 15 tasks completed today.
At WUProp, for both systems, there is no mention of of any Albert Activity recently.

Since 4th April I've completed and returned another 75 workunits on one system. All Binary Radio Pulsar Search
Each took around 4000seconds. That's ~4000*75/3600h = 83.33h
Given that I already had 32.18h with 16.20 pending (21st March), that should have brought me well over 100h (about 115 to 130h)

However WUProp says my total is 67.68h,

Albert@Home Binary Radio Pulsar Search 67.68 0.00

It seems to be the case that if you run multiple tasks on this app you only get single runtime credit, otherwise exactly 24.00h is some coincidence!

Albert@Home Binary Radio Pulsar Search (Arecibo) 24.00 (22.23%)

There seems to be a new app at climateprediction.net:
UK Met Office HADAM3P (global only) with MOSES II landsurface scheme 7.03

Can you please check it? Thanks

Thanks for the tip, the app appears to be for Linux only:

17/04/2014 15:22:04 | climateprediction.net | Message from server: UK Met Office HADAM3P (global only) with MOSES II landsurface scheme is not available for Windows/x86_64.

Got one on a Ubuntu rig though. Might try for a few more...

Just noticed that the app from the new project Spatiotemporal Quality of Service (QoS) didn't appear in my list - I have already done lots of hours for them. Please update!

Edit:
Sorry, found it - the project is only named as qos...
That's a bit irritating...

---

Life is Science, and Science rules. To the universe and beyond
Member of BOINC@Heidelberg
My BOINC-Stats

Collatz went to 4 different apps from the single app.
There is:
Micro <-- New (ARM only)
Mini
Solo
Large <-- New (GPU only)

---

My movie https://vimeo.com/manage/videos/502242

SLinCA has added another lighter version of their app;

heavy_lodci011eq32v0p125T1XZ14 - MIN:runtime~6h(checkpoint 2h),RAM~128MB,HDD~60MB

Which seems to be missing from my app list, the [22]s are being counted but not the [14]s

---

SLinCA has added another lighter version of their app;

heavy_lodci011eq32v0p125T1XZ14 - MIN:runtime~6h(checkpoint 2h),RAM~128MB,HDD~60MB

Which seems to be missing from my app list, the [22]s are being counted but not the [14]s

Agreed only the Z22 work unit types are being recorded.

I have 330987.78 seconds (91.94 hours) reported at the SLinCA project for Z22 work units with 82.75 so far being added to my WUProp totals which is fine.
I have 54,267.45 seconds (15.07 hours) reported at the SLinCA project for Z14 but nothing showing here yet.

Conan

---

My Pending Hr's for a Edges App seem to keep going up but the Actual Hr's don't seem to increase any. When I look at my running Wu's I only see a couple of the EDGeS@Home Generic BOINC Application Client Wu's running & only show a few Hr's running time, so at some point I would think the Pending Hr's would turn to Actual Hr's ???

EDGeS@Home Generic BOINC Application Client 39.50 245.60 Actually shows >>> Generic BOINC Application Client (vbox64)

PBOYZTOY012 EDGeS@Home 7bead5f8-1cfa-468f-9b62-e7137cf7fddd_52f2e1f3-86f9-4474-9214-b321c6f81db6_e7dffcf5-c29f-4d03-a83e-c97412d7c7fb_1 2.00 Generic BOINC Application Client (vbox64) Running High P. 00:41:59 (00:39:30) 64.022 - 6/3/2014 7:14:30 PM 92.91 [0] 00:39:30
PBOYZTOY012 EDGeS@Home 7bead5f8-1cfa-468f-9b62-e7137cf7fddd_bf7af5fa-11a9-4ba4-963c-ad92d7d33297_7cf45bc5-d75e-42e5-8275-52d34ba5a464_1 2.00 Generic BOINC Application Client (vbox64) Running High P. 00:41:20 (00:39:05) 63.446 - 6/3/2014 7:14:30 PM 92.91 [0] 00:39:05

---

https://signature.statseb.fr/sig-1323.png
https://stats.free-dc.org/badgesbanner.php?cpid=13a87c3a303bcdca4ba0ed600daebb6b

SLinCA has added another lighter version of their app;

heavy_lodci011eq32v0p125T1XZ14 - MIN:runtime~6h(checkpoint 2h),RAM~128MB,HDD~60MB

Which seems to be missing from my app list, the [22]s are being counted but not the [14]s

Agreed only the Z22 work unit types are being recorded.

I have 330987.78 seconds (91.94 hours) reported at the SLinCA project for Z22 work units with 82.75 so far being added to my WUProp totals which is fine.
I have 54,267.45 seconds (15.07 hours) reported at the SLinCA project for Z14 but nothing showing here yet.

Conan

The Z14 app from SLinCA is still not showing.


Also Riojascience has a new Beta app in testing


Name venus_beta_o2_fsam_125779223_w_4

Application version Polyatomic trajectory calculation beta v1.01

It also is not showing in my application list.

(being Beta most if not all are failing and they are only for Linux at the moment.)

Conan

---

Primegrid has a new sub-project called ESP with it's app Extended Sierpinski Problem (LLR). It's not showing yet on my stats.

---

SLinCA has added another lighter version of their app;

heavy_lodci011eq32v0p125T1XZ14 - MIN:runtime~6h(checkpoint 2h),RAM~128MB,HDD~60MB

Which seems to be missing from my app list, the [22]s are being counted but not the [14]s

Agreed only the Z22 work unit types are being recorded.

I have 330987.78 seconds (91.94 hours) reported at the SLinCA project for Z22 work units with 82.75 so far being added to my WUProp totals which is fine.
I have 54,267.45 seconds (15.07 hours) reported at the SLinCA project for Z14 but nothing showing here yet.

Conan

The Z14 app from SLinCA is still not showing.


Also Riojascience has a new Beta app in testing


Name venus_beta_o2_fsam_125779223_w_4

Application version Polyatomic trajectory calculation beta v1.01

It also is not showing in my application list.

(being Beta most if not all are failing and they are only for Linux at the moment.)

Conan

Thanks Sebastien,

Both now appearing and also the new PrimeGrid ESP application.

---

Both now appearing and also the new PrimeGrid ESP application.

And I show that, too. Thanks, Sebastien! Now, if only SLinCA could get back on its feet...

---

Hi!

I calculated 1 WU Solo Collatz opencl_intel_cpu(multithreaded).
Yes, CPU.

I seen this WU in Pending stat.
But now Pending = 0, "Running time" was grown little.

I presume, what this multithreaded task calculated as onethreaded, however, "Pending" was calculated properly.

Now Collatz site is down.
This WU in BOINC Manager have status Uploading.

Thanks, Sebastien! Now, if only SLinCA could get back on its feet...

- and it would also be nice to see "credit" tabs updated

Hi!

Bitcoin Utopia has 2 new apps:

cgminer (Campaign #1) (only for fast ASIC machines-multitasks)

cgminer (Campaign #2) (only for FPGA and ASIC machines-multitasks)

The first one didn't have any wu's, but the second one is active and don't show in the reported data.

Hi!

Bitcoin Utopia has another 5 new apps:

CudaMiner (Campaign #2)

cgminer (Campaign #2) (for 20+GH/s ASICs-multitasks)

cgminer (Campaign #1) (for 333MH/s ASICs - NCI)

cgminer (Campaign #2) (for 333MH/s ASICs - NCI)

bfgminer (Campaign #1) (for 20+GH/s network ASICs-multitasks)

The elder apps are also renamed as you can see in the apps page http://www.bitcoinutopia.net/bitcoinutopia/apps.php, and could be a good idea to update their names in WUProp.

A question for the powers that be here:

An issue has recently come up at PrimeGrid and we may change the "user friendly name" of one of our apps.

Specifically, the app called "Sierpinski Problem: ESP, PSP, & SoB (Sieve)" might change to something else. Apparently the BOINC stats export tool doesn't properly escape the ampersand. One possibility I'm thinking about is changing the user friendly name to get rid of the ampersand.

What would that do to wuprop? Would it cause a separate PrimeGrid app to be created and tracked because the user friendly name changed? Or do you track apps based on some other field, and therefore wouldn't be affected by this change? To be clear, the app itself isn't changing. Only the DB entry for the user friendly name.

There will be no effect if the application keeps the name psp_sr2sieve.
I will only have to run a script for updating user_friendly_name in DB.

---